| |
|
Kwikset 508 Interconnected Lock
Installation Requirements
Kwikset 508 Interconnected
locks require a center to center bore spacing of
5-1/2" (See Fig. 1 below). Two holes 2 1/8" are required, one for the deadbolt mechanism
and one for the lever. These two holes MUST be spaced 5 1/2"
from center to center (see Fig. 1 below). Each hole is standard door
prep (see Fig. 2 below).
If your door is already
drilled and the two holes measure anything other than 5 1/2" from center to
center, this model
WILL NOT FIT
your application.
If you have a modern door or you are buying an off-the-shelf door
from a home center and it is drilled for a knob and deadbolt, most
likely the spacing between the two holes will be 5 1/2" center to
center. If you have not yet received your door contact the vendor and double check the specifications, some door and
window millworks make their own rules and don't follow the door hardware industry standards.
You will be asked to verify that your
hole dimensions as per Fig. 1 and Fig. 2 below at the time you place your order.
Your order will not be shipped until this is confirmed.
This product is non-returnable.
Return Policy on Kwikset 508 Interconnected locks
See Returns and Exchange Policy
|
